Sci & Sci-Expanded

• Khabiyev, A.; Dilibal, S.; Mussulmanbekova, A.; Kanapiya, M.; Kerimkulov, D.  (2024) Additively Manufactured Continuous Processing Reactor System for Producing Liquid-Based Pharmaceutical Substances. Appl. Sci. , 14
• Gurol U., Turgut B., Kumek H., Dilibal S., Kocak M. (2024) Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure, Metals and Materials International, 30, 1342–1355
•  Gurol U., Kocaman E., Dilibal S., Kocak M. (2023) A comparative study on the microstructure, mechanical properties, wear, and corrosion behaviors of SS 316 austenitic stainless steels manufactured by casting and WAAM technologies, CIRP Journal of Manufacturing Science and Technology 47, pp. 215-227 
• Gurol U., Tumer M., Dilibal S. (2023) Experimental Investigation of Wire Arc Additively Manufactured Inconel 625 Superalloy, Transactions of the Indian Institute of Metals 76 (5), 1371-1379 
• Joula M., Dilibal S., Mafratoglu G., Owusu Danquah J., Alipour M (2022) Hybrid Battery Thermal Management System with NiTi SMA and Phase Change Material (PCM) for Li-ion Batteries, Energies 15(12) 

• Gurol U., Dilibal S., Turgut B., Koçak M (2022) Characterization of a low-alloy steel component produced with wire arc additive manufacturing process using metal-cored wire, Materials Testing 64 (6), 755-767 doi.org/10.1515/mt-2021-2155

• A Gullu, J.O.Danquah, S Dilibal (2021) Characterization of energy dissipative cushions made of Ni-Ti shape memory alloy, Smart Materials and Structures, 31
• G Altug-Peduk, S Dilibal, O Harrysson, S Ozbek (2021). Experimental Investigation on the EBM-Based Additively Manufactured Prismatic Nickel-Titanium SMA Components. Russian Journal of Non-Ferrous Metals, 62(3), 357-367, Doi: 10.3103/S1067821221030020 

• S Dilibal, H Sahin, JO Danquah, MOF Emon, JW Choi (2021) Additively Manufactured Custom Soft Gripper with Embedded Soft Force Sensors for an Industrial Robot, International Journal of Precision Engineering and Manufacturing, 1-10

•  M Lin, M Vatani, JW Choi, S Dilibal, ED Engeberg (2020) Compliant underwater manipulator with integrated tactile sensor for nonlinear force feedback control of an SMA actuation system, Sensors and Actuators A: Physical 315, 112221

• C J. Ades, S Dilibal, ED Engeberg (2020) Shape memory alloy tube actuators inherently enable internal fluidic cooling for a robotic finger under force control, Smart Materials and Structures

•  Dilibal S. (2018) Stabilized actuation of a novel NiTi shape memory alloy actuated flexible structure under thermal loading. Materiali in Tehnologije, 52(5), 599-605, Doi: 10.17222/mit.2018.042

• Dilibal S., Sahin H., Çelik Y. (2018) Experimental and numerical analysis on the bending response of the geometrically gradient soft robotics actuator. Archives of Mechanics, 70(5), 391-404, Doi: 10.24423/aom.2903

• Peduk G., Dilibal S., Harrysson O., Ozbek S., West H. (2018) Characterization of Ni–Ti alloy powders for use in additive manufacturing. Russian Journal of Non-Ferrous Metals, 59(4), 433-439, Doi: 10.3103/S106782121804003X

• Dilibal S., Hamilton R. F, Lanba A. (2017) The effect of employed loading mode on the mechanical cyclic stabilization of NiTi shape memory alloys. Intermetallics, 89, pp.1-9, Doi: 10.1016/j.intermet.2017.05.014

•   Dilibal S., Sahin H., Dursun E., Engeberg E.D. (2017) Nickel–titanium shape memory alloy-actuated thermal overload relay system design. Electrical Engineering, 99(3), 923930, Doi: 10.1007/s00202-016-0458-2

•   Engeberg E.D, Dilibal S., Vatani M., Choi JW and Lavery J. (2015) Anthropomorphic finger antagonistically actuated by SMA plates, Bioinspiration & Biomimetics, 10 (5): 056002 DOI: 10.1088/1748-3190/10/5/056002

•   Saleeb A., Dhakal B., Dilibal S., Owusu-Danquah J., Padula II S. (2015) On the modeling of the thermo-mechanical responses of four different classes of NiTi-based shape memory materials using a general multi-mechanism framework. Mechanics of Materials, 80, 6786, Doi: 10.1016/j.mechmat.2014.09.001

•  Dilibal S. (2013) Investigation of nucleation and growth of detwinning mechanism in martensitic single crystal NiTi using digital image correlation. Metallography, Microstructure, and Analysis, 2(4), 242-248., Doi: 10.1007/s13632-013-0083-7

•  Dilibal S., Sehitoglu H., Hamilton R.F., Maier H.J., Chumlyakov Y. (2011) On the volume change in Co–Ni–Al during pseudoelasticity. Materials Science and Engineering: A, 528(6), 28752881, Doi: 10.1016/j.msea.2010.12.056

• Hamilton RF, Dilibal S., Sehitoglu H., Maier HJ (2011) Underlying mechanism of dual hysteresis in NiMnGa single crystals. Materials Science and Engineering: A, 528(3), 1877-1881, Doi: 10.1016/j.msea.2010.10.042

•  Dilibal S., Tabanli R. M., Dikicioglu A. (2004) Development of shape memory actuated ITU Robot Hand and its mine clearance compatibility. Journal of Materials Processing Technology, 155156, 1390-1394, Doi: 10.1016/j.jmatprotec.2004.04.221

•  Dilibal S., Guner E., Akturk N. (2002) Three-finger SMA robot hand and its practical analysis. Robotica, 20(02), 175-180, Doi: 10.1017/S0263574701003757